🛡️Mandatory Certified PPE & Normative Equipment
🥽Welding goggles or full face shield with shade DIN 4 to DIN 5 UV/IR filter to prevent photophobia and retinal damage from concentrated glare
🧤Heavy split-cowhide or Kevlar heat-resistant gloves rated for intermittent contact up to 350°C-500°C under EN 407
🦺Heavy-duty split-leather welding apron for thermal workshop operations
🎧Enclosed leather footwear with heat-contact resistant outsoles
🛑Immediate Technical Stop Criteria
IMMEDIATE STOP if the focal point loses alignment or mechanical rigidity, if the receiver vessel lacks secure tie-downs or gimbal suspension, or if smoke or pyrolysis is detected in the collector frame.
⚖️DIY Competence Limits & Regulations
DIY Competence Limits: Suitable strictly for outdoor prototypes on non-combustible ground (concrete or bare earth). Strictly prohibited on balconies, covered decks, canopied terraces, or indoors.
👨🔧Authorized Professional RequirementFor solar thermal collectors for domestic hot water (DHW) or hydronic heating tying into household plumbing, design and purging must be executed by a licensed thermal installer (RITE).
📋Pre-Execution Verification Checklist
[ ]Place a multi-purpose ABC or CO2 fire extinguisher within 3 meters of the workstation.
[ ]Cover the parabolic mirror with an opaque protective tarp during all assembly and adjustment steps.
[ ]Establish a safety perimeter of at least 2 meters clear of bystanders, children, and combustible items.
[ ]Use exclusively opaque metallic cooking containers with insulated handles and steam release lids.